Dispersible sinking solid
Sedivore Puck
The same duty as the spike in a smaller unit. The format is specified in sizes from roughly 14 g to 170 g, selected against the dose, so a programme can be spread across a cell in many placements rather than concentrated in a few, and can be met without rounding well past it.

$495
22 lb
22 lb (10 kg) pail of dispersible solids
22 lb
Added.View cart
Freight is added at checkout, and an order on a pallet is quoted before it ships. A person reads every order against the lagoon it is going to, and says so if the quantity looks wrong for the system.
01Why this format
Accumulated organic bottom sludge
The two solids answer different halves of the same problem. A spike is chosen for penetration — mass carries it down through depth. A puck is chosen for distribution, and for arithmetic: a smaller unit spreads further across the bed, reaches the margins and the corners a heavier solid does not, can be applied from the bank by hand, and lets a calculated dose be met closely instead of overshot by a whole large unit. Neither is an upgrade on the other, and on most lagoons the honest answer is a combination.
It works at the sludge interface, and it suits a shallower blanket, or one spread across a wide area.
02Specifications
What is published, and what is not.
Each figure below is taken from a product document. Where the documents publish no value, the row says so rather than carrying an estimate: a number that later moves is worse than a stated blank, because an operator may have sized an order around it.
- Pack size
- 22 lb (10 kg) pail of dispersible solidsThe pail is confirmed. The unit size within it is SediLogic's format specification and is not yet confirmed against the article quoted.
- Pack weight
- 22 lbNet contents.
- Shipping weight
- 22.22 lbGross weight as shipped, including packaging.
- Pack price
- $495Indicative. Freight, tax and the final price are settled in the reviewed quote.
- Dose rate
- Not publishedNo dose method has been published for this format, so no quantity is sized for it. The quantity is settled with a person at review rather than estimated from another product's rate.
- Storage
- Store dry and cool, away from direct sunlight; keep the container tightly closed.
03When not to buy this
When this product is the wrong answer.
- The blanket sits under real depth. Mass is what carries a solid down, and the spike is the article for that; a lighter unit is the wrong choice for a deep cell.
- The accumulation is largely grit, sand, silt or mineral precipitate, in which case no dose of anything biological will move the number.
- The lagoon is poorly mixed and has not had its aeration assessed. Mixing is complementary to biological treatment, not a substitute for it, and treating around a mixing problem wastes the order.
- Full capacity is needed on a fixed date. Biological treatment is seasonal and gradual; a deadline that cannot move is a dredging problem.
The dosing planner screens for each of these and will say so rather than routing you to a quotation.
04Microbiology
What the organisms actually do to the material.
The mechanism is enzymatic hydrolysis. Bacillus species secrete enzymes into their surroundings that break large organic molecules into fragments small enough to be taken up and metabolised. The organisms are not consuming sludge directly; they are releasing the tools that take it apart.
| Enzyme | Acts on | What that is, in a lagoon |
|---|---|---|
| Protease | Proteins and peptides | The protein fraction of settled influent solids and of dead biomass. |
| Lipase | Fats, oils and greases | FOG, which floats and consolidates rather than settling out on its own. |
| Amylase | Starches and complex carbohydrates | Carbohydrate load, typically heaviest on food-processing influent. |
| Cellulase | Cellulose | Plant fibre and paper, which is a large share of a municipal blanket. |

Why Bacillus, and why a dry format costs nothing
Bacillus is the single most important bacterial source of exactly these enzymes, proteases in particular. It also forms endospores — a dormant state that survives drying, heat and time essentially intact, then germinates on contact with water and food. For this job the organisms that do the work are precisely the ones that dry best, which is why the two lead formats are dry and why that costs nothing biologically. Nitrifying organisms are the opposite case: they do not survive drying at all, which is why no dry product can address an ammonia permit.
What the published work supports
Mixtures of protease, cellulase and lipase reduce total suspended solids by 30 to 50 per cent and improve settling, with protease and cellulase together outperforming either alone. One controlled study reported 33 per cent volatile suspended solids reduction.
These figures are the mechanism, not a claim about this product: the peer-reviewed enzyme and hydrolysis work they rest on is collected in the scientific literature.
05Microbiological specification
The figures, and what each one is measured against.
Figures published in the product documents are shown here. Where the documents publish no numerical value, the row says so rather than carrying an estimate.
- Viable count at manufacture
- 5–6 billion CFU/gThe count as the product leaves manufacture. The row below is the one you are actually buying.
- Guaranteed count at end of shelf life
- 75% of the count at manufactureThe count guaranteed at the end of the 24-month shelf life, which is 3.75 to 4.5 billion CFU/g on the range above. It is the figure worth asking any supplier for, and the reason the shelf life means anything.
- Strains in the blend
- 6–8 Bacillus strains
- Operating temperature range
- 68–104°FThe operating range for the organisms (20–40°C), not the storage range.
- Operating pH range
- 6.0–9.0
- Biosafety level
- Not publishedNo Biosafety Level designation is published for this product.
- Shelf life
- 24 monthsIn the unopened original packaging, kept cool and dry and out of direct sunlight. The guaranteed count above is stated for the same period, which is what makes a shelf life mean anything.
The range
Other formats, and what each one is for
Which product fits is a question of where the material sits and how the system is dosed, not of which is stronger. Only a sinking solid reaches a settled blanket; a pouch or a liquid works on what the water column is carrying.
Same duty — Sludge interface
Elsewhere in the range
- SediLogic MaintainDry water-soluble pouchMaintenance dosing and general organic load
- Sedivore PolarDry water-soluble pouch, cold-weather blendOrganic load in a lagoon running cold
- SediLogic Maintain ConcentrateHigh-concentrate soluble pouchGeneral organic load on large systems
- SediLogic Maintain PlusDry water-soluble pouch, high concentrationMaintenance dosing and general organic load
- Sedivore Polar PlusDry water-soluble pouch, high concentration, cold-weatherOrganic load in a lagoon running cold
- SediLogic LiquidLiquid concentrateOrganic load in systems a solid cannot be dosed into
- SediLogic Liquid ColdLiquid concentrate, cold-weather blendOrganic load in liquid-dosed systems running cold
- SediLogic Liquid FOGLiquid concentrate, FOG-targetedFats, oils and grease, and the collection systems where they gather
